Noise monitoring with direction
One of the greatest challenges with unattended noise monitoring is to ensure that the monitored site really is the source being measured.
What is making the noise?
Is it the construction site, a nearby railway or an aircraft?
Check out noisecompass.com for more info!
Overview Norsonic was the first company to introduce sound recording of noise events in a sound level meter. This greatly improved the work to identify a noise event and to judge whether it should be excluded or not from the overall noise level. However, it’s quite time consuming to listen through numerous sound recordings. The three-dimensional Nor1297 Noise Compass significantly reduces time spent on judging if a noise source should be a part of the overall noise calculation or not, simply by defining which direction the noise is coming from. When used together with Norsonic’s sound level meters and NorCloud, the device provides a three-dimensional vector pointing at the sound source. The system may also operate off-line and collect the data on the instruments SD card for later analyze in NorReview. Applications
Specifications Horizontal angle range: 0 to 360 degrees Vertical angle range: – 90 to 90 degrees Sound pressure level range: 40 to 123 dB SPL re. 20 µPa Operating conditions: Free-field Horizontal accuracy: ± 7.5 deg. , std. dev. typ. 2.0 deg. Vertical accuracy: ± 10 deg. , std. dev. typ. 4.0 deg. Calibration: Factory calibrated with certificate Operation principle: Multi-correlation Time resolution: 100 ms Filtering: A-weighting Time averaging: Exponential time and 10 ms max Instrument compatibility: Nor145 and Nor150 Software compatibility: NorCloud and NorReview Mounting: Nor1216 and Nor1217 compatible Ingress protection: IP55 Connectivity: Ethernet 100 mbps Power supply: 5V to 15 V passive power-over-ethernet
Read more about NoiseCompass
Overview Norsonic was the first company to introduce sound recording of noise events in a sound level meter. This greatly improved the work to identify a noise event and to judge whether it should be excluded or not from the overall noise level. However, it’s quite time consuming to listen through numerous sound recordings. The three-dimensional Nor1297 Noise Compass significantly reduces time spent on judging if a noise source should be a part of the overall noise calculation or not, simply by defining which direction the noise is coming from. When used together with Norsonic’s sound level meters and NorCloud, the device provides a three-dimensional vector pointing at the sound source. The system may also operate off-line and collect the data on the instruments SD card for later analyze in NorReview. Applications
- Construction site monitoring
- Harbour monitoring
- Airport monitoring
- Road/railway monitoring
- Plant monitoring
Specifications Horizontal angle range: 0 to 360 degrees Vertical angle range: – 90 to 90 degrees Sound pressure level range: 40 to 123 dB SPL re. 20 µPa Operating conditions: Free-field Horizontal accuracy: ± 7.5 deg. , std. dev. typ. 2.0 deg. Vertical accuracy: ± 10 deg. , std. dev. typ. 4.0 deg. Calibration: Factory calibrated with certificate Operation principle: Multi-correlation Time resolution: 100 ms Filtering: A-weighting Time averaging: Exponential time and 10 ms max Instrument compatibility: Nor145 and Nor150 Software compatibility: NorCloud and NorReview Mounting: Nor1216 and Nor1217 compatible Ingress protection: IP55 Connectivity: Ethernet 100 mbps Power supply: 5V to 15 V passive power-over-ethernet
Nor1297 calibration results – Typical performance and measurement uncertainty