The power amplifier ensures that you get the maximum sound pressure level out of the Norsonic range of speakers.
With the Nor282 we have removed the need for signal and mains cable and added a graphical equalizer. Thanks to the large colour display and the graphical equalizer it is easy to adapt the speaker’s frequency response to the room response to fulfill the requirements for difference between adjacent 1/3 octave bands as per ISO 10140-5 and ISO 16283-1.
Output power: >120dB Lw if connected to a Nor276
Protection: Short-circuit and over-temperature protected
Output connector: Speakon NL4MP
Input connector: BNC
Input sensitivity: 1.0Vrms
Input impedance: 47 kΩ//220pF
Equalizer: +6 to -24dB (1dB step) in 1/3 octave bands from 20Hz-20kHz
Noise types: Pink, White, Brown, 1/1 and 1/3 octave BP noise, Sine, Stipa and external via BNC or WiFi.Swept sine is supported from Nor850
Wi-Fi: 802.11b/g/n – 2.4Ghz band ex channel 13. Supports Infrastructure and Access Point
Temperature range (Operating / Storage / Charging):
-10 to +35 °C / -10 to +50 °C / 5 –40 °C Charging is aborted if outside temp range
Humidity: (Operating, Storage and Charge); 20-90% Non-condensing
Enclosure class: IP20
Dimensions / Weight: (DxWxH); 240 x 120x 256 (mm) / 5.1 kg
Mains: 90-250Vac 40-60Hz
Battery operating time: 90 minutes at full power when connected to Nor276 Dodecahedron speaker
Battery type / Capacity: 48V LiFePO4, (Lithium Iron Phosphate) / 288 Wh
Recharge time: 2.5 h
CE conformity standards:
EMC EN-55032-2015+A11+A1-2020 EN-55035-2017+A11-2020 EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4
Radio spectrum efficiency EN 300 328 V2.2.2
Safety and health EN 62368-1 :2014+A11 :2017 IEC 62311:2007 / EN 62311:2008, EN 61010-1:2010/A1 2019
Accessories included:
Mains cable, WiFi and remote antennas, remote handswitch